Sincethe Philips OLED+ 936's panel is not extremely bright, we recommend setting this option to minus 1. Note: If you move further into the minus range, the picture brightness increases. In the plus range, the display is respectively darker on your TV. 22 or 0. The Picture mode should either be on Cinema or on Movie mode. Avoid leaving it at Sports, Vivid, Dynamic, etc. Sharpness should be left at 0% for the best results. In cases where 0% is blurry, take it to 50% and leave it there. The contrast and backlight should be left at 100% while the brightness, tint, and color at 50%. Inaddition, the backlight does not play a role in a self-luminous panel compared to LCD TVs. The sharpness level of the panel determines how clearly your Samsung TV should highlight contours from each other and how strongly corners and edges are accentuated on the screen. In order to start with the settings, you have to do some preparation Checkyour HDMI cable connections. Disconnect the HDMI cable from your computer and the TV and then reconnect making sure the connections are secure. If the issue continues, try using a different HDMI cable. Try connecting your computer to a different HDMI port on your TV, and then change the TV input to match the port used. Asyou may have guessed, Edge Lit TVs use lights along the perimeter of your TV, while Full Array televisions have multiple zones throughout the display and, and Direct Lit TVs, like Full Array TVs, have LEDs placed throughout the back of the television (but fewer of them). At this point, the technology may seem similar—lights are placed BlackFrame Insertion. The Hisense U6G can reduce the backlight flicker frequency from 960Hz, down to 60Hz. To do so, simply enable the Motion Clearness setting from the Advanced settings menu. Note that enabling this feature causes the overall brightness to decrease noticeably. .

what should the backlight be on my tv